New Products


Evolution Controls Inc. is pleased to present our newest additions to the expanding line of controllers for the energy-saving EC Motors.


EVO/™ECM-VCU S3 (Visual Control Unit)

The VCU S3 now has a new general 0-10VDC output option for

0-10VDC controlled EC motors, damper actuators, valves, etc.

EVO/™ECM-DPC (Differential Air Pressure Control Unit)

Finally, an easy to use, cost-effective, one-piece air pressure controller for EC motors.  Control the air pressure in a space served by an EC driven fan. Great solution for variable volume building exhaust systems, room pressurization, and duct/plenum pressurization where space is served by an EC Motor powered fan.

SNV-S1 Front.jpg
EVO/™ECM-SNV-S1 (Severe Environment Control Unit)

If you need a simple, rugged 0-+10V to ECM motor interface, the ECM-SNV Severe Environment control is the right choice.  Small and simple to mount. Simply connect ~24V power, an input signal and two or three wires to the motor to start using the control.  Mount the SNV in warm moist climates, or where cold weather taxes the life of other controls. 

ECM Mspd.jpg
EVO/™ECM-MSpd (Multi-Speed Controller)
  • Up to 4 Speed Calls over 2 wires 

  • Isolated Switch Input Protection  

  • PWM or 0-+10V Output 

  • Gradual or Fast Speed Change 

  • Pilot Pulse (Autoswitch) provides a 49us pulse at a minimum and maximum signal so the motor knows the EVO/ECM-MSpd is connected.  

10Y-PWMa Datasheet.jpg
EVO/™10Y-PWMa (Pulse Width Modulation Control Unit)

The EVO/10Y-PWMa converts a PWM signal to 0 to +10V signal.  It works with a wide range of pulses. The pulse input is electrically isolated from the   AC/DC 24V power and output signal.   Use this control to connect a 0 to +10V devices to EC Motor controls Or use it in a network to distribute and share a 0 to +10V signal with multiple devices.